& nbsp; The use of air suspension blowers has brought disruptive energy-saving effects to many industries and made great contributions to the improvement of global green environmental protection. However, more and more air suspension blowers will encounter various problems after a certain period of use. We need to learn how to maintain and repair air suspension blowers. Below, we will analyze some professional points of air suspension blower maintenance:
& nbsp; 1、 Diagnostic fault:
& nbsp; Firstly, a comprehensive diagnosis of the blower is required to understand the cause and scope of the malfunction. Common faults include electrical faults, mechanical faults, intake system faults, exhaust system faults, etc. Maintenance personnel can diagnose faults through instrument detection and manual observation. For example, using a thermometer to measure the temperature of motors, frequency converters, and frequency converters to check for overheating; Use a pressure gauge to measure wind pressure and air pressure, and check if they are within the normal range; Observe whether there are any abnormal vibrations, noises, or other phenomena during the operation of the equipment.
& nbsp; 2、 Stop the blower from running:
& nbsp; Before carrying out maintenance, it is necessary to stop the operation of the blower to avoid personal injury and equipment damage caused by the operation of the blower. Before stopping the machine, the air pipeline and wires should be removed, and the power supply should be cut off.
& nbsp;3、 Dismantling the casing and components:
& nbsp; According to the fault situation, it may be necessary to disassemble the casing, impeller, transmission device and other related components of the blower. Be careful and cautious during the disassembly process to avoid damaging the components. For example, when disassembling the impeller, it is necessary to first remove the casing of the blower, and then check whether the impeller has cracks or deformations. If the impeller is severely damaged, the entire impeller needs to be replaced.
& nbsp; 4、 Cleaning and inspection:
& nbsp; Clean and inspect the disassembled components. Use tools such as vacuum cleaners, brushes, and cotton cloth to remove dust, dirt, and foreign objects from components. Check whether each component is worn, damaged, deformed, etc., such as whether the motor bearings are worn, whether the impeller is cracked or deformed, and whether the transmission device is loose.
& nbsp; 5、 Replace damaged components:
& nbsp; Damaged components should be replaced promptly. For example, if the bearings of the motor are severely worn or the windings are burned out, it is necessary to replace the bearings or windings; If the filter element has not been replaced for a long time, resulting in poor filtering effect, a new filter element needs to be replaced; If the hose falls off or is damaged, replace it with a new hose and ensure that the interface is standardized.
& nbsp; 6、 Installation and Debugging:
& nbsp; Reinstall the repaired components onto the blower, ensuring correct and secure installation. Then debug the blower and check if all parameters are normal, such as air volume, air pressure, temperature, etc. During the debugging process, it is important to observe the operating status of the equipment and make timely adjustments if there are any abnormalities.
& nbsp;7、 Record and feedback:
& nbsp; After the repair is completed, the repair process should be recorded, including fault symptoms, diagnostic results, repair measures, replaced parts, and other information. At the same time, the maintenance situation should be reported to relevant departments or personnel for subsequent maintenance and management of the equipment.
& nbsp; It should be noted that the maintenance of air suspension blowers involves knowledge of electrical and mechanical aspects. If the maintenance personnel do not have the relevant professional skills and experience, it is recommended to seek the help of our professional technical personnel at Smad. In addition, safety operating procedures must be strictly followed during the maintenance process to ensure the safety of personnel and equipment.
preprocess
Previous：What is the difference between high-pressure fan and high-speed fan
Next：Already the last article
